RC Qatar RC
 


*
Welcome, Guest. Please login or register.
Did you miss your activation email?
February 07, 2012, 08:00:25 AM


Login with username, password and session length
Pages: [1]   Go Down
  Print  
Author Topic: Glitches for PPM Rx  (Read 544 times)
0 Members and 2 Guests are viewing this topic.
fernie_vital
ForumRegular
***
Offline Offline

Posts: 44


« on: November 07, 2008, 08:30:12 PM »

Hi Anwar,
I observed that when my battery comes little bit drained then glitches will start to be seen and have read a lot about the PPM. They say that glitches are always observed to this type of receivers (Rx) but they also mentioned about FERRITE Ring. Ferrite, as I know is used to filter some "NOISE". What can you say about this? Is this a good and a cheap solution for the glitches?

Regards,
Fernie
Logged
anwar
Administrator
*****
Offline Offline

Posts: 444


« Reply #1 on: November 07, 2008, 09:03:01 PM »

Ferrite rings are typically used in electric helis, to reduce interference from the ESC and electric motor.  It may help in your nitro situation also.

The important thing is to get your antenna routed away from the rest of the electric stuff. 
« Last Edit: November 07, 2008, 09:19:30 PM by anwar » Logged

fernie_vital
ForumRegular
***
Offline Offline

Posts: 44


« Reply #2 on: November 08, 2008, 02:17:02 PM »

Hi, Already did what we had discussed in the field but still having some glitches. I think this is normal to a PPM Rx. Let me see after replacing my Rx with the PCM if I will still have those glitches.

Thanks & regards,
Fernie
Logged
anwar
Administrator
*****
Offline Offline

Posts: 444


« Reply #3 on: November 09, 2008, 02:13:10 PM »

Ideally, we should try to identify the root cause of the glitch.  The Align 2-in-1s are known to cause PPM glitches in some cases. 

That said, switching to PCM will mask small glitches.  Remember that it is not eliminating glitches, just masking them.  If the glitches grow bad, it may result in a lockout.  Hopefully, your situation is not one of those.
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines

2008-2011 (c) RC Qatar
Valid XHTML 1.0! Valid CSS!